The Porosity Problem

Customers looking for acetal (polyoxymethylene) are sometimes surprised to learn that the plastic comes in both homopolymer and copolymer resins. While both resins still result in a material that is “acetal” – there are some significant differences. Homopolymer acetal is slightly harder with higher compressive strength and stiffness. Copolymer acetal has better chemical resistance and less outgassing but perhaps the key difference between the two is – “centerline porosity”Acetal 1 - Rev

Centerline porosity occurs when acetal cools during its manufacturing. The outer portions solidify first and as the material cools there is a corresponding loss of volume in the center. Problem is the inflexible extruded “shell” restricts the volume change, causing pockets or voids to form. This phenomenon is visibly noticeable in acetal sheet or rod as a light band in the center of the material. The acetal may appear to be laminated to the naked eye. This has several undesirable effects but the two most important in applications are: 1.) Porosity provides a route for gasses and liquids and 2.) Porous regions permit bacterial growth in food processing or medical applications. The issue is with the homopolymer resin, however.

Copolymer acetal has lower centerline porosity and thus in applications where bacteria is an issue, or jobs where outgassing is a problem, copolymer would be advantageous – even though the strength is (slightly) less than homopolymer material. Centerline porosity may or may not affect your application – but it is certainly important to keep it in mind.

CDN: 1 800 667 0999
USA: 1 866 733 2684


About redwoodplastics
Since 1971 Redwood Plastics and Rubber has worked directly with customers to find solutions for a variety of problems including shock, abrasion, noise, wear, & friction. In partnership with our manufacturing divisions, Redwood Plastics and Rubber molds, machines, and fabricates a wide-range of high quality, custom components. Our dedication to ethical and respectful interaction with our customers, suppliers and each other is the key to our long standing relationships. Relationships that are enabled by the pride, enthusiasm and commitment of each member of our organization.

Comments are closed.

%d bloggers like this: